Basic Info.
Certification
ISO9001, QS, GB
Type
High Pressure Storage & Transportation Equipment
Storage Objects
Liquid, Gas
Product Description
MARINE LOAGING ARM
Marine loading arm is designed for fluid transport between terminal and tanker pipeline system of liquid or gaseous state one kind of product.
Our company design and manufacture of Marine oil arm in the process of transmission,within the scope of normal trough boat drift with the tank ship linkage. Range through the monitoring system in the tank when the ship manifold drift out of the scope of work provides audible and visual alarm. And equipped with emergency escape system implementation under the condition of loading arm emergency escape and hull.
number | model | On the behalf of content | specification |
1 | AM | Marine loading arm | |
2 | 6 | Six rotary joint | |
3 | 3 | Double-barrelled | 1--self-supporting marine loadin g arm 3--independent support marine loading arm 4--independent support marine lo ading arm (Double-barrelled) |
4 | H | Hydraulic control | M-manual H-hydraulic driven |
5 | 300 | Caliber 300mm | |
AM61 marine loading arm
AM61M 100 Marine loading arm model 61, Caliber DN100, Manual
AM63 marine loading arm
Basic Features: Material:
Easy operation Carbon steel
Easy seal change Stainless steel
Small dead weight Low-temp steel
Minimal wind loads Lined steel, etc
Separate support structure Nominal diameter:
Uniform diameter DN80 to DN600
Long reach capability
The model features a separate support structure with its own generously aized mechanical bearings. Which take up all major external loads and memets.
The model had been developed especially to meet the increased requirements for loading critical media. furthermore,the model can be designed for long reach capability.
The model can be equipped with emergency release coupler(ERC) and/or quick connect/disconnect coupler(QCDC)
AM6 3 M 200 Marine loading arm,model 63, Caliber DN200, Manual
AM64H 200/100 Marine loading arm,model 64,Caliber DN200/100,Double-barrelled hydraulic
FEATURES
The swivels and pipe are only subjected to stress by internal pressure and weight.
Generously sized bearings at supporter minimizefriction and facilitate easy operation.
The diameter of swivel and pipe is uniform throughout.
ALL swivels are identical thus considerably reducing the spares requirements.
Line is attached to supporter by means of special mounts which also compensate for thermal expansion due to temperature variations to overstressing.
Balance the arm in all positions by meansof counterweights.
Balance inboard and outboard arm by a moving counterweight.
ACCESSORIES
Hydraulic drive assemblies
Drain connecters
Mech.locking device
Vacuum breaker and/or N2 purge system
Electrical stray current protection
Safety ladders
Adjustable support jack
Insulation flange
Range limit system
Shut-off valve
Emergency release coupler(ERC)
Quick connect/disconnect coupler(QCDC)
Vapour return line, steam line etc.
Connection area
The connection area is that volume in space in which the loading arm should be connected to the ship's flange. The area results the min./max.mainflod setback and sizes of vessel(fully laden of light)at low or high tide.
Working area
In the area the ship's flange connection can move freely and without danger during loading/unloading.
Warning area
Operating personnel will be warned by audio/vosial alarms product valves on the land and ship side should be closed to interrupt product transfer.
Emergency release area
The emergency release area is required ti actiovate and complete separation of the arm form the tanker manifold.
Emergency release coupler (option)
Emergency release coupler is composed of double ball valve or double butterfly valve,it is installed in the straight pipe on the top of loading arm's three-dimensional joint,when loading arm is on working,it will work in the following situationWhen there is a fire,the operator can't close
Gust caused intense drift of the ship
Drift is too large,the operator can't close
Emergency release coupler will escape,before it escapes,it will close the pipeline on the ship side and the shore side in the same time to make sure that media does not leak.
Manual,hydraulic driven QCDC(option)
It is installed in the flange which is docked with loading arm and ship,its characteristic is that it doesn't have to use special tools.Its jaw can join the loading arm's flange and ship's flange together quickly,so it can save manpower and material resources effectively.
Related Products
Address:
Room507, C Block of Mingsai Tech Building, Minghuantown, Wujin District, Changzhou, Jiangsu, China
Business Type:
Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Furniture, Industrial Equipment & Components, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Packaging & Printing, Textile, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, ISO 20000
Company Introduction:
Changzhou Krib Co., Ltd was founded 2015, we are internation trading company and special business on supermarket equipment and...Our Products are sold all kinds of countries like USA, Kwait, Jmaica, Cyprus, Turkey...
We are focus on price and service which make us have steady customers, meanwhile we are as agent of customers and help them find different kinds of products, do inspection, arrange shipment ect.
Welcome to visit our company and show you around factory where you would like the products.